INDUSTRIAL BUILDINGS AND LARGE SURFACES
PILLARS, PRE-TENSED BEAMS, PRE-TENSED PANELS TC30, FLAT PASSIVE PANELS & 2TB
This system is preferably used for the construction of large surfaces, such as logistic warehouses, industrial buildings, shopping malls, etc. The system consists of prestressed pillars and beams of up to 40 meters of free light, forming porches that are repeated every 10 meters. Above the beams go the prestressed panels that save the light between the porches. These panels can incorporate bays for overhead skylights, wind fans or can be sized to receive special loads. The wall plates can be flat or ribbed. The system is compatible with any other material such as a metal structure, isopanel, wood, etc.
MEZZANINES
This system for mezzanines (if required) is basically the same as the one for industrial buildings, (using pillars and beams) but in this case prestressed panels type 2T are used as well. The height of them (T) is sized according to the load and light request to be saved. This construction system for mezzanines allows us to generate a large volume where in general no intermediate structure is required, lowering the amount of pillars and thus promoting freedom of design. As this are not structural, the interior walls can be made with dry or light partition walls, which offers a high speed of work, minimum man hours and walls that (if desired) could even be interchangeable. In turn, the system allows us to have large glazed areas on the facades and continuous perimeter glass from floor to ceiling.
NERVATED ENCLOSURES
Pre-cast concrete enclosures are an efficient and safe solution for the construction of enclosures, warehouses and logistics warehouses. If compared with metal enclosures, the characteristics of concrete give the building superior safety for vandalism, superior fire resistance, wind resistance and durability. Additionally, this product do not require practically any maintenance. The solution saves up to 11m in height in a single module.
FLAT ENCLOSURES
This system consists of self-supporting flat plates. Generally these plates are placed horizontally saving lights up to 12 meters. The height of them is variable and depends on the type of design of the building and can reach a maximum of 3 meters. These plates offer the structure optimal security, have low maintenance, allow great flexibility for the design, can have a varied surface or finishes and are also compatible with any other construction material.
